The electrostatic GalinFlex 2C manual coating equipment with the GalinFlex 2 GM03 manual powder gun is ideally suited for manual coating of objects.
There is auto/manual change-over function
Original interchangeable
One year quality warranty
Enough stock and Fast delivery
Best after market service
OEM service
Electrical dataGalinFlex 2C |
|
Nominal input voltage |
100V240VAC |
Frequency |
50-60Hz |
Connected load (without vibrator) |
40 VA |
Nominal output voltage (to the gun) |
eff.10 V |
Nominal output current (to the gun) |
max. 1.2 A |
Connection for rinsing function (valve) |
24 VDC max. 3 W |
Temperature range |
0°C - +40°(+32°F - +104°F) |
Max. surface temperature |
100 °C (+212 °F) |
Approvals |
II 3 D IP54 120 °C |
GalinFlex 2C |
|
MAX.input pressure |
10bar |
MIN.input pressure |
6bar |
Input pressure (Dynamic based on pressure regulator setting) |
5.5 bar / 80 psi |
Max.water vapor content of the compressed air |
1.3g/Nm³ |
Max.oil vapor content of the compressed air |
0.1mg/Nm³ |
Max.compressed air consumption |
11Nm³/h |
GalinFlex 2C |
|
Width |
444mm |
Depth |
310mm |
Height |
428mm |
Weight |
12kg |
Processible powders
Plastic powder |
yes |
Metallic powder |
yes |
Enamel powder |
no |
Find excellent quality galinflex 2c powder cup laboratory set from one of the largest manufacturers and suppliers - GALIN, which has been dedicated to this field for years. Leveraging on advanced equipment and superior techniques, we can offer you galinflex 2c powder cup laboratory set with high accuracy, high efficiency, reliable performance and long lifespan. Welcome to buy or wholesale our delicate products.